Compressed air hose with quick coupler
Connecting
♦
Push the compressed air connector
quick coupler of the compressed air hose
the sleeve automatically springs forwards .
Cutting
♦
Pull back the sleeve on the quick coupler of the
compressed air hose
compressed air connector
CAUTION!
►
Caution! When disconnecting the quick
coupler of the compressed air hose
the coupler firmly to prevent injuries caused
by the hose flying off .
Inflation
with adapter
Schrader valve
Area of use
This application allows for a simple and accurate
inflation . The manometer
tire pressure . Thanks to the integrated release
valve
it is possible to reduce the tire pressure
if it is too high .
♦
Ensure that the ON/OFF switch
♦
Press the lever quick coupler
attach it .
♦
Place the lever quick coupler
and then release the lever .
♦
Insert the mains plug
a mains power socket .
♦
Switch the ON/OFF switch
grated control lamp lights up .
♦
Pull the trigger
.
PKZ 180 C5
into the
,
and remove the
.
, hold
is used to check the
is set to "O" .
downwards to
onto the valve
of the compressor into
to "I" . The inte-
♦
Read the air pressure from the manometer
♦
Let the trigger
off again .
♦
Switch the ON/OFF switch
as the correct or permissible air pressure has
been reached . The integrated control lamp
goes out .
♦
Press down the lever quick coupler
it off the valve .
♦
Remove the mains plug
power socket .
using the valve adapter
Sclaverand valve
Dunlop valve
Area of use
The valve adapter
facilitates easy inflation of
bicycle tires .
♦
Use the valve adapter
shown above .
♦
Connect the valve adapter
quick coupler
and then release it .
♦
Start by pressing the valve adapter
valve .
♦
Inflate as described above .
to "O" as soon
and pull
from the mains
to pump to the valves
into the lever
onto the
GB │ IE │ NI │ CY
│
.
7
■