Troubleshooting - AEG bmg 4922 Bedienungsanleitung

Troubleshooting

Malfunction Cause
The battery symbol • The batteries are
is indicated on the drained.
display.
• Did you use 1.2V
batteries?
A conspicuous abnormal • The blood pressure
result is indicated. cuff is improperly
placed or is in the
wrong position.
• You moved the
arm or the device.
• Your heartbeat is
irregular.
• Did you talk
during the
measurement?
Were you nervous
or somewhat
excited?
• There was a
malfunction dur-
ing the infl ation
of the cuff or in
the remainder of
the process.
"ERR" is indicated on • The blood pressure
the display. cuff is insuf-
fi ciently infl ated.
• There was a
malfunction dur-
ing the infl ation
of the cuff or in
the remainder of
the process.
The device does not • The batteries are
react to any but- drained.
ton press. • Malfunction of
the electronic
control
Care
Remedy
Attention:
• Install new
• Do not immerse the device in water.
batteries
• The blood pressure measuring device may not get
• The device only
wet.
works with 1.5V
• Do not use any harsh cleaners or solvents.
batteries
• Fasten the cuff
with more care
• Wipe off the blood pressure cuff with a wet cloth. For
persistent spots, you can apply a gentle soap solution.
• Stay as relaxed
• Dry off the blood pressure cuff after cleaning it.
as possible and
• Please, wipe the blood pressure measuring device with
do not move
anything on the
a dry cloth.
device.
• If your heartbeat
is strongly
Applied Standards
irregular, you
cannot take
measurements
The CE marking CE 0123 of the measuring device
with this device.
corresponds to EU Directive 93/42/EEC (Medical Device
• Avoid all infl u-
Directive). The following standards apply for the design
ences that cause
unrest.
and/or production of the product:
EN 60601-1: Medical electrical equipment Electromagnetic
• Pay attention to
EN 1060-1: Non-invasive blood pressure meter
our notes in the
EN 1060-3: Non-invasive blood pressure meter
portions of the
Amendments of the technical specifi cation without
text for the blood
pressure cuff and
information are reserved for updating reasons.
measurement.
• Repeat the
Representative for Europe:
measurement
ShangHai International Holding Corporation GmbH
• Fasten the cuff
Eiff estr. 80
again
20537 Hamburg
• Sit quietly
Deutschland
Telephone: 0049-40-2513175
Fax: 0049-40-255726
• Replace the
batteries
• Remove the
batteries and
re-insert them
again.
• Take the device
to a dealer or to
service.
English
compatibility.
51