Specifications - Panasonic EY6813 Bedienungsanleitung

. USAGE SUGGESTION
1. If there isn't enough force pushing down on the bit, the hammer may not be able
to blow in hammering mode.
This is to prevent the hammering mode from operating with no load. Press down
harder on the bit to engage the hammer and cause it to blow.
Always be sure to press down with enough force when working.
2. In winter or in other situations where the temperature of the unit is low (5°C or be-
low), the blow of the hammering mode may be weaker than normal at the begin-
ning stage.
This is because the grease becomes stiffer in low temperatures, increasing fric-
tion.
If this should happen, operating hammering mode with no load for approximately
30 seconds and repeat this 3 times. This will restore its blowing power.

.SPECIFICATIONS

Main Unit (EY6813)
Maximum Drilling Diameter
Motor Voltage
Speed At No Load (RPM)
Blows Rate Per Minute (BPM)
Weight (with battery pack)
Dimensions (L×W×H)
Battery Pack
Battery included
Voltage
Concrete
20mm (25/32 )
Steel
13mm (33/64 )
Wood
27mm (1-1/16 )
DC Motor 24V
Slow Mode 0 520 /min (rpm)
High Mode 0 950 /min (rpm)
Soft Mode 0 3100 /min (bpm)
Hard Mode 0 4600 /min (bpm)
4.35 kg (9.6 lbs) EY6813NQKW / 4.2 kg (9.3 lbs) EY6813FQW
316×206×74 mm
(12 - 28/64 ×8 - 7/64 ×2 - 58/64 )
EY9210 : (EY6813NQKW)
Ni-MH Battery
24 V DC (1.2 V × 20 cells)
- 10 -
EY9116 : (EY6813FQW)
Ni-Cd Battery