Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Clean all parts of the appliance before using the first time as described below
under "Cleaning".
Assembling the appliance
1.
Place the appliance steadily on a solid, level surface. If desired, moisten the
suction feet (7) with water, so the appliance sits steadily on the surface.
2.
Cut the fruit into two equal halves.
3.
Remove the transparent cover and insert the plug of the power cord into the
mains socket.
4.
Place a suitable glass under the spout (6) and press the spout downwards.
So the fruit juice can run into the glass.
5.
The cone (4) is made of two parts. For big fruit halves, use the large cone
and for small fruit halves, use the small cone. To detach the cone, hold the
cone by the pulp pusher (5) and pull out the large cone.
6.
Place one of the halves of the fruit over the cone, with the freshly cut face
facing down. The juicer cone will start to rotate automatically when a slight
downward pressure is applied.
7.
If you do not wish to pour the juice into the glass straight away, lift up the
spout (6). Now the juice will be collected into the juice container (1).
Do not keep citrus fruit juice in the juice container.
All manuals and user guides at all-guides.com
Using
7
Werbung
Inhaltsverzeichnis
