Other Functions - Velleman VRC801D Bedienungsanleitung

All manuals and user guides at all-guides.com
d. Deleting All Learned Commands in the Remote Control
Use this function if you would like to delete all learned
commands in the VRC801D.
• Hold the SET key pressed for 3 seconds.
• Select LEARNING using the
or the
OK.
• Select DELETE ALL using the
or the
press OK.
• SURE DELET appears on the LCD. Press OK to confirm.
All the learned commands have been deleted.

5. Other Functions

a. Setting Up the Clock
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
or the
press OK.
• Select TIME SETUP using the
or the
press OK.
• Use the or the button to select the hour, minute and
AM/PM. Set the time using the numeral keys, set AM/PM
using the or the button. Press OK.
• Press EXIT to quit.
b. Locking the Volume
Enable this function when you only use one device to adjust
the volume.
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
or the
press OK.
• Select VOL LOCK using the
or the
OK.
• Select the device key corresponding to the device
• Select ON or OFF using the or the button. Press OK
to confirm.
• Press EXIT to quit.
c. Locking the Device
Enable the device-lock function to lock the code of your device. This code will not be modified during an automatic code
search.
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
or the
press OK.
• Select DEV LOCK using the
or the
OK.
• Select the device using the corresponding device key.
• Modify the status using the or the button. Press OK to
confirm.
• Repeat the 2 steps above to lock other devices if desired.
• Press EXIT to quit.
VRC801D
button and press
button and
button and
button and
button and
button and press
button and
button and press
- 4 -
VELLEMAN