Westfalia 96 09 31 Originalanleitung Seite 6

Installation and Operation
 Pull the heated steering wheel cover over the steering wheel of your vehicle.
 The steering wheel cover is suitable for steering wheels with a diameter of
37 to 39 cm.
 Insert the 12 V plug of the device into the 12 V socket or the cigarette lighter
socket of your vehicle.
 Before starting your journey, disconnect the heated steering wheel cover
from the power supply and insert the socket under the edge of the cover so
that it is not in the way when you are steering.
Changing the Fuse
The heated steering wheel cover is protected with a fuse 10 A, F10AL250V,
5 x 20 mm in the 12 V trigger. If the fuse blows, change it as shown in the
graphic.
Unscrew
Cleaning
 Clean the steering wheel cover with a slightly dampened cloth. The steering
wheel cover is not washable. Also use some detergent as needed. Do not
immerse the steering wheel cover in liquids.
 To avoid damaging the surfaces, do not use any harsh chemicals or abrasive
cleaners.
Technical Data
Voltage:
Nominal power:
Fuse:
Cable length:
Suitable for steering wheels with a diameter of 37 to 39 cm
Operation
Old Fuse
New Fuse
12 V
36 W
10 A, F10AL250V, 5 x 20 mm
120 cm
6