Inhaltsverzeichnis
Werbung
14 | English
inserting a battery. Accidents can occur as a result of
carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Read and strictly observe the safety instructions in
u
the operating instructions of the cordless drill/driver.
Always make sure that you maintain a safe distance.
u
When operating the power tool in high up areas, e.g.
on a ladder, ensure that no one is beneath you.
Never touch the application tool or parts of the power
u
tool near to the application tool after use; these may
be extremely hot. There is a risk of burns.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool (GSR 18V-60 FC with hammer adapter GFA
18-H) is intended for hammer drilling in concrete, brick and
stone.
The hammer adapter GFA 18-H may only be used with the
GSR 18V-60 FC cordless drill/driver.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Holder
(2)
Torque presetting ring
(3)
Gear selector switch
(4)
Battery
(5)
Battery release button
(6)
Worklight
(7)
Rotational direction switch
(8)
On/off switch
(9)
Locking ring
(10) Hammer adapter
(11) Auxiliary handle
(12) Handle (insulated gripping surface)
Items included
Hammer adapter (10) with auxiliary handle (11).
Application tools and other accessories shown or described
are not included with the product as standard.
You can find the complete selection of accessories in our ac-
cessories range.
1 609 92A 6NK | (23.11.2021)
Technical Data
Hammer adapter with
auxiliary handle
Article number
Cordless Drill/Driver
Article number
Rated speed
Impact rate at rated speed
Rated voltage
Max. drilling diameter
– Concrete
– Masonry
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Sound pressure level
Sound power level
Uncertainty
Vibration total value
Uncertainty
A) Measured with GBA 18V 2.0Ah and GBA 18V 12.0Ah.
Noise/vibration information
Noise emission values determined according
to EN 62841-2-6.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-6:
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
GFA 18-H
2 609 199 816
GSR 18V-60 FC
3 601 JG7 1..
-1
min
0–1900
-1
min
0–5400
V=
18
mm
10
mm
16
kg
2.4–3.4
°C
0 to +35
°C
–20 to +50
dB(A)
90
dB(A)
101
dB
3
2
m/s
11.9
2
m/s
1.5
Bosch Power Tools
Werbung
Inhaltsverzeichnis
