Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power indicator lights
1
The power indicator (H) on the camping fan will show how full the battery is, with flashing
indicators representing 25%, 50%, 75% and 100% charge. When fully charged, all power
indicators will be continuously on.
Charging
2
1. Connect the included USB-C™ cable to the charging port (E) on the camping fan and
connect the other end of the cable to a standard USB charger.
The power indicator (H) on the camping will light up and indicate how full the battery is
Æ
2. (If all indicator lights are on) disconnect the charging cable.
8.2 Setting up the remote controller
Pull out and remove the plastic tab from the battery compartment. The remote controller is
now ready to use.
9 Installation
1. Ascertain the best location for the camping fan and its use as either a fan or LED light.
2. Pull out the hook on the handle.
3. Hang the camping fan --OR-- Fold back the handle to create a stand and place the fan on
a suitable surface.
10 Operation
10.1 Operating the camping fan
Important:
Do not place your finger or any other object through the gaps in the front protective cover
when the device is in use. Keep children away!
Turning on and selecting fan speeds
1
Camping fan: Press the fan key (G) repeatedly to select the fan speed options: fan on/low
→ medium → high → off.
Remote controller: Press the fan ON/low speed key (2), medium speed key (3) or high
speed key (4) to set the fan to the desired speed. The remote controller can be used within
5 m of the camping fan.
Turning off
2
Camping fan: Repeteadly press the fan key (G) until the fan turns off.
Remote controller: Press the fan OFF key (1) to turn the fan off.
Setting timers
3
Preconditions:
The fan is running.
D
1. On the remote controller, press the 2h (5), 3h (6) or 5h (11) fan timer key to automatically
turn off the fan after 2, 3 or 5 hours, respectively.
The power indicator lights (H) will flash once to indicate that the timer has started.
Æ
10.2 Camping LED light
Turning on and selecting brightness
Camping fan: Press the LED light key (I) repeatedly to select the light brightness options:
Light on/low, medium, high or off.
Remote controller: Press the fan ON/low brightness key (8), medium brightness key (9) or
high brightness key (10) to set the LED light to the desired brightness.
Turning off
1
Camping fan: Repeteadly press LED light key (I) until the light turns off.
Remote controller: Press the LED OFF key (7) to turn the light off.
Setting timers
2
Preconditions:
The LED light is on.
1. On the remote controller, press the 2h (5), 3h (6) or 5h (11) LED timer key to automatically
turn off the LED light after 2, 3 or 5 hours, respectively.
The power indicator lights (H) will flash once to indicate that the timer has started.
Æ
10.3 Powering USB devices
Power and charge compatible devices via the USB-A power supply port.
1. Make sure the device meets the following specifications:
– Voltage: 5 V/DC
– Current: max. 1A
2. Connect the device to the USB-A port with a suitable USB cable to power a device.
3. After use, disconnect the USB-A cable.
11 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Switch off the fan.
3. Clean the product with a dry, fibre-free cloth.
12 Disposal
12.1 Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE shall dispose of it separately from unsorted municipal waste.
Spent batteries and accumulators, which are not enclosed by the WEEE, as well
as lamps that can be removed from the WEEE in a non-destructive manner, must
be removed by end users from the WEEE in a non-destructive manner before it is
handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
12.2 (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the
product. According to the Battery Directive, end users are legally obliged to return all spent
batteries/rechargeable batteries; they must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled
with this symbol to indicate that disposal in household waste is forbidden. The
abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury,
Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations
and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit
and their exposed terminals should be covered completely with insulating tape before disposal.
Even empty batteries/rechargeable batteries can contain residual energy that may cause them
to swell, burst, catch fire or explode in the event of a short circuit.
13 Technical data
13.1 Camping fan
13.1.1 Power supply
Input.............................................. 5 V/DC, max. 2 A (USB-C™)
Output ........................................... 5 V/DC, max. 1 A (USB-A)
Rechargeable battery ................... 2x 3.7 V, 2500 mAh rechargeable lithium battery
Charging time ............................... 4 - 6 h
Operation times ............................ Fan: 5 - 10 h (new and fully charged)
Light: 20 h (new and fully charged)
13.1.2 Light
Light source .................................. LED
Colour temperature ....................... 5500 - 6500 K
Luminous flux ............................... 160 lm
Brightness ..................................... 30%, 70%, 100%
13.1.3 Environment
Operating/Storage conditions ....... 0 to +40 C, 25 - 85 % RH (non-condensing)
13.1.4 Other
Protection class ............................ Class III
Dimensions (W x H x D) ............... 165 x 165 x 125 mm
Weight .......................................... 405 g
13.2 Remote controller
Input voltage ................................. 3 V, 1x CR2052 battery
Dimensions (W x H x D) ............... 40 x 85 x 8 mm
Weight .......................................... 13 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2489720_v1_0122_02_m_2L_(1)
Werbung
