Temperature Setting - Hitachi PC-ARFP1E Installations- Und Betriebshandbuch

OPERATION METHOD
4.6 SWING LOUVER DIRECTION
1 Press " " (run/stop). Make sure that the operation is started.
Press " " or " " and select "LOUV".
OK
/
?
?
N O T E
For the indoor unit without the auto louver mechanism, the indication
of "LOUV." will NOT be displayed on LCD.
2 By pressing " " or " ", the louver direction will be changed
as follows.
LCD Indication COOL, DRY HEAT, FAN

4.7 TEMPERATURE SETTING

?
N O T E
• It is possible to configure the setting temperature scale by means of
the optional functions for every 0.5ºC (p1=00) or every 1ºC (p1=01).
• Depending on the type and setting of the indoor unit, it may not be
possible to set the temperature by 0.5ºC.
• The max./min. temperature may differ depending on the type of
indoor unit.
• The max/min temperature is available to change by setting the cooling
lower limit for setting temperature (or heating upper limit for setting
temperature) from the function selection.
• When the "Automatic Reset of Setting Temperature" function is
selected, the temperature is automatically returned to the preset
temperature after the temperature set-point change.
5 PMML0496 rev.1 - 12/2020
Meeting Room
A/C
MODE SPEED LOUV. TEMP
COOL
SPEED TEMP ADJ
Auto-swing
Recommended
angle
Angle range
Angle range
Recommended
angle
: Auto swing operation will be started. At this time, the
louver will swing repeatedly on LCD.
OK
/
?
?
N O T E
• The air flow angle is different for each indoor unit type. Check
Installation & Operation Manual for Indoor Unit to be used for the
detailed information.
• Louver position on LCD and the actual louver position may not match
during the auto swing operation. To fix the louver positions, set the
angle after checking the position on LCD.
• The louver may NOT stop immediately right after the switch is
pressed.
1 Press " " or " " and select "TEMP".
OK
/
?
2 By pressing " ", the temperature is increased by 0.5ºC.
(Max. 30ºC). By pressing " ", the temperature is decreased
by 0.5ºC. (Cooling, Dry, Air Flow operation: Min. 19ºC)
(Heating operation: Min. 17ºC).
OK
/ ?
Meeting Room
A/C
MODE SPEED LOUV. TEMP
COOL
SPEED TEMP ADJ
A/C Meeting Room
MODE SPEED TEMP
COOL
SPEED ADJ
A/C Meeting Room
MODE SPEED TEMP
COOL
SPEED ADJ
.