Restore To Factory Settings; Tool Box And Cleaning Accessories - Conrad 2377927 Bedienungsanleitung

3. The set temperature is shown as follows.
The ON/OFF indicator light will continue flashing when the machine is in custom temperature mode.
Æ
After entering custom temperature mode, if no button is pressed within 1 minute, the machine will exit this mode
Æ
and return to standby.

11 Restore to factory settings

If you configured the wrong settings, press and hold the ON/OFF, GRIND, SINGLE and DOUBLE buttons at the
same time. The machine will beep and all the indicators will flash together 3 times. The machine then will return to
the factory settings.
11.1

12 Tool box and cleaning accessories

The product is equipped with a tool box for storing the cleaning pin and cleaning brush. The single-cup filter and
double-cup filter can also be stored in the toolbox.
The toolbox is placed in the top left corner of the drip tray and can be pulled out when you remove the drip tray from
the machine.
Cleaning brush
Cleaning pin
Tool box
38
Set temperature
88 °C
90 °C
92 °C
94 °C
96 °C
Indicator
Grind
Grind and double-cup
Single-cup
Single-cup and double-cup
Double-cup