Herunterladen Inhalt Inhalt Diese Seite drucken

English; Safety Instructions - Bosch EasyHeat 500 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für EasyHeat 500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

10 | English

2. auf Verlangen des Endnutzers Altgeräte, die in keiner
äußeren Abmessung größer als 25 cm sind, im Einzel-
handelsgeschäft oder in unmittelbarer Nähe hierzu un-
entgeltlich zurückzunehmen; die Rücknahme darf nicht
an den Kauf eines Elektro- oder Elektronikgerätes ge-
knüpft werden und ist auf drei Altgeräte pro Geräteart
beschränkt.
Der Vertreiber hat beim Abschluss des Kaufvertrags für das
neue Elektro- oder Elektronikgerät den Endnutzer über die
Möglichkeit zur unentgeltlichen Rückgabe bzw. Abholung
des Altgeräts zu informieren und den Endnutzer nach seiner
Absicht zu befragen, ob bei der Auslieferung des neuen Ge-
räts ein Altgerät zurückgegeben wird.
Dies gilt auch bei Vertrieb unter Verwendung von Fernkom-
munikationsmitteln, wenn die Lager- und Versandflächen für
Elektro- und Elektronikgeräte mindestens 400 m² betragen
oder die gesamten Lager- und Versandflächen mindestens
800 m² betragen, wobei die unentgeltliche Abholung auf
Elektro- und Elektronikgeräte der Kategorien 1 (Wärmeüber-
träger), 2 (Bildschirmgeräte) und 4 (Großgeräte mit mindes-
tens einer äußeren Abmessung über 50 cm) beschränkt ist.
Für alle übrigen Elektro- und Elektronikgeräte muss der Ver-
treiber geeignete Rückgabemöglichkeiten in zumutbarer Ent-
fernung zum jeweiligen Endnutzer gewährleisten; das gilt
auch für Altgeräte, die in keiner äußeren Abmessung größer
als 25 cm sind, die der Endnutzer zurückgeben will, ohne ein
neues Gerät zu kaufen.
English

Safety instructions

Read all the safety information and instruc-
tions. Failure to observe the safety informa-
tion and follow instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This heat gun is not intended for
u
use by children or persons with
physical, sensory or mental limita-
tions or a lack of experience or
knowledge. This heat gun can be
used by children aged 8 or older
and by persons who have physical,
sensory or mental limitations or a
lack of experience or knowledge if
a person responsible for their
safety supervises them or has in-
1 609 92A 7UN | (30.05.2022)
structed them in the safe opera-
tion of the heat gun and they un-
derstand the associated dangers.
Otherwise there is a risk of operating
errors and injury.
Supervise children during use,
u
cleaning and maintenance. This will
ensure that children do not play with
the heat gun.
Handle the heat gun with care. The
u
heat gun produces intense heat
which increases the risk of fire and
explosion.
Take particular care when working in the vicinity of
u
flammable materials. The hot airflow or hot nozzle may
ignite dust or gases.
Do not work with the heat gun in potentially explosive
u
areas.
Do not aim the hot airflow at the same area for pro-
u
longed periods. Working with plastic, paint, varnish or
similar materials may produce easily flammable gases.
Please be aware that heat is directed to covered flam-
u
mable materials, which may ignite.
Safely place the heat gun on the storage surfaces
u
after use and let it cool completely before packing it
away. The hot nozzle can cause damage.
Do not let children use the heat gun unsupervised
u
when it is switched on.
Store idle heat guns out of the reach of children. Do
u
not allow persons unfamiliar with the heat gun or
these instructions to operate the tool. Heat guns can be
dangerous in the hands of untrained users.
Do not expose the heat gun to rain or wet conditions.
u
Water entering a heat gun increases the risk of electric
shock.
Do not misuse the cable, for example by using it to
u
carry, hang up or unplug the heat gun. Keep the cable
away from heat and oil. Damaged or entangled cords in-
crease the risk of electric shock.
Always wear safety goggles. Safety goggles reduce the
u
risk of injury.
Pull the plug out of the socket before adjusting the
u
tool settings, changing accessories, or storing the
heat gun. This safety measure prevents the heat gun
from being started accidentally.
Always check the heat gun, cable and plug before use.
u
Stop using the heat gun if you discover any damage.
Do not open the heat gun yourself, and have it re-
paired only by a qualified specialist using only original
Bosch Power Tools

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Universalheat 600

Inhaltsverzeichnis