Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung Seite 21

10 Place the clean water tank back into the appliance.
11 Charge the appliance. Insert the power plug into the socket on the back of
the appliance. Then insert the adapter into the wall socket.
12 To start the AUTOCLEAN cycle, press the middle
screen, press the on/off
13 The appliance performs the AUTOCLEAN cycle.
Note: The Autoclean cycle lasts approx. 4 minutes. For best results, let the
appliance run through the AUTOCLEAN cycle completely. You can pause or
cancel the AUTOCLEAN cycle at any time.
Note: If you cancel the AUTOCLEAN program, the appliance will suck up
the remaining water in the After-clean tray for about 10 seconds.
button first to activate the screen.
English
button. If you see a black
23