Panasonic PAW-GRDSTD40 Montageanleitung Seite 30

INSTALLATION INSTRUCTIONS FOR SCREWLESS GROUND STAND PAW-GRDSTD40
The stand´s design relies on punch locking tabs; assembly requires no screws or similar fastening equipment. This allows for quick and easy assembly with a minimal
need for tools. However you must use caution during assembly; please read these instructions carefully before installation.
An assembled stand cannot be disassembled.
WARNING!
PLACE THE STAND ON SOLID GROUND. DO NOT STEP ON THE ASSEMBLED GROUND STAND (RISK OF INJURY). A PROFESSIONAL
INSTALLER MUST INSTALL THE STAND. PANASONIC IS NOT RESPONSIBLE FOR INCORRECT ASSEMBLY OR MISUSE OF THE
GROUND STAND. THE GROUND STAND CAN BEAR A MAXIMUM WEIGHT OF 180 KG. DIMENSIONS (H X L X W): 400 X 900 X 400 MM
Make sure you have all the pieces:
1. Mounting key
2. Feet x 4
3. Washers x 16
1. Fold the end pieces like in the images.
2. Use the key to turn the locking tabs. Make sure the tabs line up with the holes before turning. Use caution during this operation.
Flatten the tabs with a hammer or something similar.
30
4. M8 nuts x 16
5. Long sides x 2
6. End pieces x 2
7. Distance bolts x 4
8. Vibration dampers x 4
9. Crossbars x 2