Safety Guidelines For Screwdrivers - Parkside PAS 4 D6 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Battery tool use and care
Recharge only with the charger
a)
specified by the manufacturer. A
charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack .
Use power tools only with
b)
specifically designated battery
packs. Use of any other battery packs may
create a risk of injury and fire .
When battery pack is not in use,
c)
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another. Shorting
the battery terminals together may cause
burns or a fire .
Under abusive conditions, liquid may
d)
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns .
Do not use a battery pack for
e)
tool that is damaged or modified.
Damaged or modified batteries exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury .
Do not expose a battery pack or
f)
tool to fire or excessive temperature.
Exposure to fire or temperature above
130 °C may cause explosion .
Follow all charging instruction and
g)
do not charge the battery pack or
tool outside the temperature range
specified in the instruction. Charging
improperly or at temperatures outside the
specified range may damage the battery and
increase the risk of the fire .
CAUTION! RISK OF EXPLOSION!
Never charge non‑rechargeable
batteries!
Protect the rechargeable battery from
max . 50°C
heat, for example from continuous
exposure to sunlight, fire, water and
moisture .
There is a risk of explosion .
Service
Have your power tool serviced by
a)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained .
Never service damaged battery
b)
packs. Service of battery packs should be
only be performed by the manufactured or
authorized service providers .
˜ Safety guidelines for
screwdrivers
Hold the power tool by the insulated
a)
gripping surfaces, when performing
an operation where the fastener
may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock .
GB/IE 27