Attaching Accessories; Cleaning And Care; Noise Development - AEG HAS 5582 Bedienungsanleitung, Garantie

Curling tongs
your hair a long-lasting shape.
which you can hold down the hair strands.
Shaping nozzle

Attaching accessories

Select the desired accessory.
1. Attach the accessory to the
2. Turn the accessory slightly
Unlock the accessory
anticlockwise.
Electrical Connection
the mains voltage to be used matches that of the device.
You can ind this information on the nameplate.
tective contact socket.
Use
Select a function on the slide switch:
Position 0 : off
Position 1 : gentle stream of air (low heating power)
Position 2 : strong stream of air (high heating power)
COOL (Cold Air)
Use this switch to stop the heating process.
same time. The heating process is switched off.
Use the cool air to ix your hair in place.
2 Slide the switch back to its original position if you no
longer need the function.
base unit with the arrow
mark above the arrow on
clockwise. The accessory is
now locked.
-
Ionizing function –
Reduction of static in hair
The appliance is also itted with an ionizer which gives off
negative ions with the air low when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky inish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
After use, turn the lower switch to be "0
remove the mains plug.
Storage
Mains Cable
this may result in the cable breaking.

Cleaning and care

WARNING:
socket.
might result in an electric shock or ire.
CAUTION:
Body and accessories
Clean the body and the accessories with a soft, dry cloth
without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.

Noise development

The sound pressure level in the ear of an operator (LpA) was
English
25