Set The Clock; Select A Source; Select A Listening Zone; Mute The Button Beep - Philips CE235BT/13 Bedienungsanleitung

Set the clock

1
Press and hold to access the system menu.
2
Press / repeatedly until [CLK] is
displayed with time digits blinking.
3
Rotate anti-clockwise to set the hour.
4
Rotate clockwise to set the minute.
Display the clock
Press and hold /DISP until [CLK] and the set
clock are displayed.
‡ To exit the clock display, press any button
or rotate .

Select a source

Press AS/SOURCE repeatedly to select a source.
‡ [RADIO]: Listen to FM/AM radio.
‡ [AUDIO IN]: Listen to the audio input
through the AUDIO IN socket.
‡ [USB PLAY]: When a USB storage device
is connected and recognized, you can
VHOHFW WKLV VRXUFH WR SOD\ DXGLR ÀOHV WKDW
are stored on it.
‡ [SD PLAY]: When a micro SD card is
inserted and recognized, you can select this
VRXUFH WR SOD\ DXGLR ÀOHV WKDW DUH VWRUHG
on it.
‡ [BT AUDIO]: Listen to the audio streamed
from a connected Bluetooth device.

Select a listening zone

1
Press and hold until one of the following
options is displayed.
‡ [ALL]: For all passengers
‡ [FRONT-L]: For the front-left seat only
‡ [FRONT-R]: For the front-right seat only
‡ [FRONT]: For front passengers only
2
Press / repeatedly to select a listening
zone.

Mute the button beep

The beep sound of buttons is enabled by
default.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [BEEP ON]
or [BEEP OFF] is displayed.
‡ [BEEP ON]: Enable the beep sound of
buttons.
‡ [BEEP OFF]: Mute the beep sound of
buttons.
3
Rotate to change the setting.
EN 11