Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Strap with ratchet „RC2515-1"
1. Fasten the hook of the strap (without the
ratchet) e. g. on the frame of your trailer
and pull the strap around the object to be
fastened.
2. Take the strap with the ratchet and thread
the already fastened strap through the slot
of the roll. Tense the strap a little bit.
3. Lift up the handle and move it forth and
back until the strap is securely tightened.
For lashing the strap, fold down the
handle. Make sure the roll has at least 1.5
wraps.
4. For releasing lift up the handle, press and
keep the lock pressed. Unfold the handle
as far as it will go. The handle is in a
horizontal position and the latching is
released. Now you can pull the strap out
of the slot.
Technical Data:
Lashing Capacity LC= 150 daN
Strap Width 25 mm
Extension: 7 %
Strap „B22710"
1. Wrap the strap around the object to be fastened. Press the clip down in order
to open it. Thread the other end of the strap bottom-up through the clip
opening Pull the strap firmly in order to tie down.
2. To release, press the clip down and hold the clip pressed. Now you can pull
out the strap.
Technical Data:
Lashing Capacity LC= 100 daN
Strap Width 25 mm
Extension: 5 %
Using
Handle
Lock
S
= 75 daN | S
TF
Strap Length: 3.5 m
Material: PP (Polypropylene)
S
= 50 daN | S
TF
Strap Length: 2.5 m
Material: PP (Polypropylene)
V
Roll with Slot
= 50 daN
HF
= 50 daN
HF
Werbung
