Introduction; Intended Use - Parkside PPS 40 B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Greatest rated value of the
I
mains current.
1 max
Power input;
Number of phases and
1 ~ 50 Hz alternating current symbol
and rated value of the
frequency.
Open circuit voltage
U
rated value
0
Plasma cutter PPS 40 B2

• Introduction

Congratulations! You have
purchased one of our high-quality products.
Please familiarise yourself with the product
before setup or first use. Please also read the
safety instructions carefully. This product must
be set up or used only by people who have
been trained to
do so.
Keep out of the reach of children!
PLEASE NOTE!
fThe use of the term 'product' or
'device' in the following text refers to the
plasma cutter named in these operating
instructions.

• Intended use

The device is intended for compressed-air
plasma cutting of all electrically conductive
metals. Observing the safety instructions
and assembly instructions and operating
information in the instructions for use is also
Rated value of the cutting
I
current
2
Static frequency
converter-transformer-
commutator
Rated value of the
U
mains voltage
1
a component of the intended use.
It is imperative to adhere to the applicable
accident prevention regulations. The device
must not be used:
in insufficiently ventilated rooms,
„
in moist or wet environments,
„
in explosive environments,
„
to defrost pipes,
„
in close proximity to people with cardiac
„
pacemakers and
in close proximity to easily flammable
„
materials.
Use the product only as described and only
for the specific applications as stated. Keep
these instructions in a safe place. Ensure you
hand over all documentation when passing
the product on to anyone else. Any use that
differs to the intended use as stated above is
prohibited and potentially dangerous.
Damage or injury caused by misuse or
disregarding the above warning is not
covered by the warranty or any liability on
the part of the manufacturer. The device
is not intended for commercial use.
Commercial use will void the guarantee.
... / Introduction
GB/IE 31