Radio Station Set-Up; Troubleshooting - AEG MC 4445 Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the
fault yourself.
Fault
No display
No image displayed on
screen

Radio Station Set-up

This device has a built in FM radio receiver. There are 3 ways to scan
through the radio stations: Automatic Scan, Manual Scan and Direct
Frequency Input.
Auto scan
1. Use the FUNCTION button (Fig. 2/4) to select the RADIO mode.
2. Press the SEARCH button (Fig. 2/17). The device is now scanning
the current frequency band for stations and saves them
automatically.
NOTE:
Also use the
automatic station scan.
The station order cannot be changed.
Manual scan
1. Use the FUNCTION button (Fig. 2/4) to select the RADIO mode.
2. Use the
which you want to save the station.
3. Press the " "/" " buttons (Fig. 2/18) to search for a station. Press
the corresponding button repeatedly until you have found the
desired radio station.
4. Use the MEM button (Fig. 2/23) to play back the radio station that
has been found.
Use the " "/" " buttons (Fig. 2/22) to select a saved radio station.
Possible cause
No power supply
no power supply/mains switch
switched off
Video cable not correctly con-
nected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
(Fig. 1/6) button on the device to start the
or buttons (Fig. 2/22) to select the storage location at
Solution
WARNING: Before troubleshooting, switch the
player off.
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
Switch the player on by the mains switch (Fig. 1/25).
WARNING: Before troubleshooting, switch the
player off.
Check the correct fit of the Video cable
the Video cable". Make sure that the jacks are tightly in
the sockets.
Insert a CD/DVD.
Use only compatible media (see
Turn the CD/DVD around.
Clean the CD/DVD.
English
59
"Connecting
"Technical data").