Parkside PTUS 1 A1 Bedienungs- Und Sicherheitshinweise Seite 15

charging process must be carried out indoors because the splash pro-
tection no longer works when the USB socket
The charge level of the rechargeable battery is shown on the prod-
uct on the charge indicator
when it is switched on:
Red LED is fast flashing: The rechargeable battery needs to
charge.
Not any LED and sound effect response: the rechargeable
battery voltage is very low, it must be charged immediately.
Red LED is slow flashing: The rechargeable battery is in the
charging status.
Red LED is illuminated: The rechargeable battery is fully
charged.
Switch the frequency controller
the charging process to prevent disturbances from visual or
acoustic signals.
Remove the rubber plugs from the USB socket
Plug the USB charging cable's
socket and connect the USB plug of the USB charging ca-
12
ble to your computer with a USB port. Alternatively, you
13
can use a USB adapter, which can be bought from a retailer.
(a red LED on the motion sensor
6
to Programme "0" during
3
round plug into the USB
13
is open.
12
.
12
)
5
GB 15