Dry Ironing - Grundig SI 4550 Bedienungsanleitung

OPERATION _________________________________
Preparation
1 Remove all packaging materials, labels and
protective foil and dispose of them according to
the applicable legal regulations.
2
Clean the outer parts of the appliance as
described in the section "Cleaning and care".
3
Place the appliance on an even, stable, dry and
non-slip surface.
Notes
•
During the first use, a light odour may arise from
the iron. This ceases after a couple of uses.
• The "CLICK" sound you hear during ironing, is
because of the anti-drip feature of your appli-
ance. This is a normal sound.
•
In order to generate steam, the soleplate
of your iron has to rise to a certain level of tem-
perature. By means of the "anti-drip" feature of
your iron, water dripping from the soleplate
of the iron shall be prevented until the soleplate
attains the temperature required.
• Your product is intended for use with tap water.
If your tap water is excessively limy, we recom-
mend to use a mixture of tap water with purified
water. Prior to ironing for the first time fill twice
and vaporize. Meanwhile, use the steam burst
frequently. In this way, both the steam perfor-
J
mance will improve and also the dust particles
which might have penetrated through the steam
channels will be cleaned up.
•
If water runs out during ironing, you can top
up water without waiting the appliance to cool
down. But do not forget to unplug it before top-
ping up.
•
When spray does not squirt water, in order to
eliminate any possible blocking, close the spray
hole with your finger and press on the spray but-
ton several times.
20 ENGLISH
Caution
•
When your iron is filled with excessive water,
it may overflow. To avoid this, when you hold
your iron horizontally, make sure that the level
of water in the appliance does not exceed the
MAX. line.

Dry ironing

1
Set the steam setting knob
position.
Caution
•
Always read the care label on your garment be-
fore setting the temperature.
1
Set the required ironing temperature. Do not
press the steam burst button during dry ironing.
E
2
After ironing let the appliance cool down in a
location that is safely out of reach of children.
E
Filling in the water tank
1
Always unplug the appliance. Set the steam
setting knob to " " position.
2
Open sealing cap of filling inlet
Use cups for filling the water tank. Do not fill the
water tank further than up to the MAX marking.
3
Close the water refill lid
Note
•
Even when ironing garments without steam;
water should be available in the appliance in
order to use the water spray
• Do not fill the water tank with perfume, vinegar,
laundry starch, lime removers or other products
or chemicals which shall facilitate the ironing
process.
•
If your tap water is excessively limy, we recom-
mend to use a mixture of tap water with purified
water.
to the " "
H
on the iron.
G
.
G
.
F