Miele 512 Serie Umbau- Und Montageanweisung Seite 9

Produktgruppe 512, 522
9 von 36
Slide 4 clamps, Fig. 6, Pos. 1over the machine feet.
Insert four M6 bolts, Fig. 6, Pos. 2, with B6.4 galvanised washers, Fig. 6, Pos. 3, from above through the existing holes.
Secure the 4 clamps from below with 38 mm Ø washers, Fig. 6, Pos. 4, B6.4 galvanised washers, Fig. 6, Pos. 3, and M6 nuts Fig. 6,
Pos. 5, tightened from below.
Danger!
Risk of toppling and falling! It is absolutely essential to secure the plinth to the floor and the machine to the plinth.
Note
For details of the drain connection in the floor or wall, see the PW 6080 installation plan.
Note
Fixing materials for a floating screed floor are to be provided on site.
Plinth UG 6008
Fit the 2 side panels with M4 x 12.4 raised-head screws (Torx 20), see Fig. 7.
Fit the 2 side panels with M4 x 12.4 raised-head screws (Torx 20), see Fig. 7.
Carry out appropriate safety checks.
Reconnect the machine to the gas (if applicable) and electric mains.
Carry out a functional test either with the service programme or a wash programme. Check the drain connection from the machine to
the on-site drain in the floor or wall for leaks.
en
27.10.2009 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 07707490