Safety Instructions; Symbols; Designations; Abbrevations - Bosch Rexroth PSG 6250.00 ASTK Typspezifische Anleitung

24/33 Bosch Rexroth AG | Electric Drives and Controls
To this Documentation
1.3.1

Safety instructions

The Safety instructions please look in Tab. 1: Required and supplementary
documentation.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Tab.2: Meaning of the Symbols
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step
1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations :
Tab.3: Designation
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
ASTK
A-Version, Sensor, Temperatur, frontal outlet
1.3.4

Abbrevations

The in this documentation used abbrevations please look in Tab. 1: Required and
supplementary documentation.
PSG 6250.00 ASTK | R911172345