Date And Time Setting - Velleman WT705G Bedienungsanleitung

6.2

Date and Time Setting

1. Hold SET pressed to enter the date and time setting mode.
2. Set your date and time with UP/DOWN; go to the next digit by
pressing SET. The setting sequence is:
year > month > date > hour > minute > 12h/24h > exit.
3. The system automatically exits the setting mode after 30
seconds of inactivity.
6.3 Alarm Setting and Activation
Alarm Setting
1. Hold UP pressed to enter the setting mode for alarm 1; hold
DOWN pressed to enter the setting mode for alarm 2.
2. Set your alarm time with UP/DOWN; go to the next digit by
pressing SET. The setting sequence is:
M-F* > S-S* > M-F + S-S > hour > minute > exit.
* M-F = Monday to Friday, S-S = Saturday to Sunday.
3. The system automatically exits the setting mode after 30
seconds of inactivity.
Alarm Activation
1. Slide the alarm button of the desired alarm to ON to switch on
the alarm function.
2. The alarm will ring at the set time. Press SNOOZE/LIGHT to
enter the snooze function or slide the alarm button to OFF to
deactivate completely.
6.4 Backlight
Press SNOOZE/LIGHT to activate the backlight. The backlight will
automatically switch off after 10 seconds.
6.5 Date Display
Press SNOOZE/LIGHT twice to display the date. The display will
automatically switch to time display after 10 seconds.
7. Cleaning and Maintenance
The clock does not need any particular maintenance. However,
occasionally wipe it with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
V. 01 – 19/05/2015
WT705G
5 ©Velleman nv