Operation - Velleman CAMCOLVC26N Bedienungsanleitung

Use the supplied wall mount to attach the camera securely to a wall or
ceiling. Prior to installing the wall mount, ensure that all existing bolts are
securely tightened and that no supply pipes are concealed in the wall.
Mark the holes on the wall or ceiling using the wall mount as a template.
Use a 6 mm drill to drill the holes and secure the wall mount.
Make sure the camera is loaded with the memory card, and batteries
inserted or the power supply connected. Switch the camera to standby
mode.
Fix the camera onto the wall mount and position into the desired direction.

7. Operation

7.1 Mode Switch
Prior to setting up the camera for surveillance, it must be tested for the
respective purpose. For this purpose, there is a test mode available. In
addition to changing settings, photos and videos can be taken, and existing
photos can be viewed in this mode.
 OFF: the camera is completely
switched off.
 TEST: select the test mode to
adjust the settings and make or
playback photos and videos.
 ON: the camera is activated to
take photos.
7.2 Control Panel
Set the mode switch to TEST and the camera and monitor are switched on.
Recording Mode
MENU Enter the menu
REPLAY Start the replay mode
Switch to manual recording mode
Switch to manual photo mode
SHOT Start/stop manual recording; take photo
No function
OK/ /
Replay Mode
MENU Enter the replay menu
REPLAY Return to recording mode
V. 02 – 26/09/2018
CAMCOLVC26N
9 ©Velleman nv