Technical Details; Technical Data; Filter Capacity Of The Filter Cartridge - Miele Plug & Pure Gebrauchsanweisung

Technical details

EN
16

Technical data

Operating pressure ........................................................200- 860 kPa (rel.)
Water start temperature .................................................... 4°C to 30°C
Ambient temperature
- in operation ................................................................ 4°C to 40°C
- in storage .................................................................. -20°C to 50°C
Nominal flow ................................................................................60 l/h
Loss of pressure at nominal flow ........................................200 kPa
Bed volume .................................................................................... 2.7 l
Weight (dry / wet) ................................................................ 2.7 / 3.9 kg
Dimensions
- Filter system (WxDxH) ................................... 124 x 123 x 476 mm
- Filter cartridge (WxDxH) ............................... 123 x 123 x 469 mm
Operating position...................................................................vertical
Water connection ........................................................................ 3/8"

Filter capacity of the filter cartridge

Conductivity in input water in
μS/cm
50
100
200
300
400
500
The specified filter capacity refers to a shutdown time of the output
water of 10 μS/cm.
Due to external influencing factors (fluctuating raw water quality,
water temperature, etc.), this information may deviate by +/- 10%.
Note: The filter capacity can be monitored with a commercially availa-
ble conductivity indicator. When connected to Miele CUBE and CUBE X
models of small steriliser, the conductivity is monitored via an internal
sensor of the unit.
Miele Plug & Pure
Filter capacity in litres
2250
1130
565
375
280
225