Setting The Security Function - Sony VGP-UHDM25 Bedienungsanleitung

Setting the security function

Notes
• Do not disconnect the USB cable when the wireless keys are being registered.
• Be sure that the personal computer is not in power save mode when the wireless keys
are being registered.
• You need to register both wireless keys.
1
2
z
3
GB
16
Turn on the personal computer and connect the drive using
the USB cable (page 12).
Press the REGIST button.
The blue light of the wireless key receiver flashes.
Tip
If you do not touch the wireless key receiver with a wireless key for more than about
5 seconds, the blue light of the wireless key receiver will go out and the previous
status returns.
Touch the wireless key receiver with one of the wireless
keys.
The blue light of the wireless key receiver goes out for about one
second, then the wireless key is registered to the drive.