Herunterladen Inhalt Inhalt Diese Seite drucken

Fehlersuche Und Abhilfe; Technische Daten; Trouble-Shooting; Technical Data - Viessmann 5302 Bedienungsanleitung

Koppler
Vorschau ausblenden Andere Handbücher für 5302:
Inhaltsverzeichnis

Werbung

5.2 Kontroll-LED
Die rote Kontrollleuchte neben der Taste „Reset"
zeigt optisch den Betriebszustand an:
leuchtet dauerhaft = Koppler an, Regelbetrieb
blinkend = Kurzschluss bei sendender Zentrale
5.3 Reset
Die Taste „Reset" ist ohne Funktion!

6. Fehlersuche und Abhilfe

Jedes Viessmann-Produkt wird unter hohen Quali-
tätsstandards gefertigt und vor seiner Auslieferung
geprüft. Sollte es dennoch zu einer Störung kom-
men, prüfen Sie bitte als erstes die Verkabelung.
Wenn Sie die Fehlerursache nicht finden können,
nehmen Sie bitte Kontakt mit uns auf (service@
viessmann-modell.com).
Senden Sie das Modell zur Kontrolle bzw. Repa-
ratur bitte erst nach Rücksprache mit uns an den
Viessmann-Service. Die Adresse finden Sie unten.

7. Technische Daten

Maße:
Anschlüsse: 2 x LSB, Digitaleingang (Gleissignal)
Betriebsspannung: max. 30 V Digitalspannung
Digitalsysteme: Märklin-Motorola/NMRA-DCC
Schutzklasse/Isolation:
Temperatur (Betrieb):
Temperatur (Lagerung):
Entsorgen Sie dieses Produkt nicht über
den (unsortierten) Hausmüll, sondern
führen Sie es der Wieder-verwertung zu.
Die aktuelle Version der Anleitung finden Sie auf der
Viessmann-Homepage unter der Artikelnummer.
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder
DE
unter 14 Jahren! Anleitung aufbewahren!
Model building item, not a toy! Not suitable for children
EN
under the age of 14 years! Keep these instructions!
Ce n'est pas un jouet. Ne convient pas aux enfants de
FR
moins de 14 ans ! C'est un produit décor! Conservez cette
notice d'instructions!
Não é um brinquedo!Não aconselhável para menores de
PT
14 anos. Conservar a embalagem.
8
108 mm x 70 mm x 23 mm
0 – 40 °C
-10 – 60 °C
Modellspielwaren GmbH
Am Bahnhof 1
D - 35116 Hatzfeld-Reddighausen
www.viessmann-modell.de
5.2 Control LED
The red control LED beside the "Reset" button
shows the status of the coupler:
LED on = coupler on, standard operation
LED blinking = short circuit at the sending com-
mand station (track format input)
5.3 Reset
The "Reset" button has no function!

6. Trouble-shooting

Every Viessmann product is manufactured under
high quality standards and is tested before deliv-
ery. Should despite of this a fault occur, please
check first the power supply and the wiring.
If you cannot find the failure cause please contact
our service department (service@viessmann-
modell.com).
If needed send the model after consulting the
Viessmann service department for checking and
repair. Address see below.

7. Technical data

Dimensions:
Connections: 2 x LSB, digital input (track signal)
Operating voltage: m ax. 30 V digital track power
Digital systems: Märklin-Motorola/NMRA-DCC
IP20
Isolation:
Temperature (operation):
Temperature (storage):
Do not dispose this product through (unsorted)
general trash, but supply it to the recycling.
The latest version of the manual can be looked up
at the Viessmann homepage entering the item-No.
Modelbouwartikel, geen speelgoed! Niet geschikt voor
NL
kinderen onder 14 jaar! Gebruiksaanwijzing bewaren!
Articolo di modellismo, non è un giocattolo! Non adatto
IT
a bambini al di sotto dei 14 anni! Conservare instruzioni
per l'uso!
Artículo para modelismo ¡No es un juguete! No
ES
recomendado para menores de 14 años! Conserva las
instrucciones de servicio!
108 mm x 70 mm x 23 mm
IP20
0 – 40 °C
-10 – 60 °C
Stand 02/sw
07/2016
Ho/Pic/Me
92342

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis