Travel Lock - Philips HQ8290 Bedienungsanleitung

travel lock

You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
Note: The travel lock cannot be activated when the
shaver is connected to the mains.
activating the travel lock
1 Press the on/off button for 4 seconds to enter
the travel lock mode (your display may differ
from the one shown in the figure).
, The lock symbol and the power-on symbol in
the on/off button flash for a few seconds to
indicate that the travel lock has been activated.
Note: When you press the on/off button for less than
4 seconds while the shaver is in the travel lock mode,
the lock symbol and the power-on symbol in the on/off
button flash for a few seconds.
Deactivating the travel lock
1 Press the on/off button for 4 seconds.
, The lock symbol disappears and the motor
starts running to indicate that the travel lock has
been deactivated.
The shaver is now ready for use again.
Note: When you start charging, the travel lock is
automatically deactivated.
charging
It takes approx. 60 minutes to fully charge the
battery.
When you charge the shaver for the first time or
after a long period of disuse, let it charge for 4 hours.
EnglisH
11