Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F
G
H
I
J
¡ Attaching and removing the
battery pack
1. Align the triangle on the
battery pack with the line on
the battery adapter. Slide the
battery up until it clicks into
place ( F ).
2. Remove the battery by
pressing and holding the
adapter's BATT. RELEASE
button while you slide the
battery down ( G ).
Attach the microphone.
4
q Remove the small screw with a
Phillips screw driver and slide off
the wind screen ( H ).
w Insert the microphone into the
protector and slide the wind
screen back on. Replace the
screw ( I ).
e Insert the microphone into the
microphone clamp. Align the
marks on the microphone and
the clamp and tighten the knob
to hold the microphone firmly in
place ( J ).
r Plug the microphone cable to
the XL1S's MIC terminals ( J ).
17
Werbung
