When entering the relative mode: The product
enters the manual range mode and stays
in the present range if it is in auto range
mode (Exception: This does not apply to the
capacitance and AC current measurement
functions) .
The relative mode is not available for
frequency measurements .
Measuring DC voltage
Connect
–the black test probe 9 to COM 8 and
–the red test probe 9 to
Turn the rotary knob 3 to V
Connect the test probes 9 across the source
or circuit to be tested .
The reading is shown in the display 6 .
Measuring negative DC voltage: – 23 is
shown in the display 6 .
m WARNING: Risk of electric shock and
product damage! Do not apply a voltage
of > 600 V between the terminals .
Measuring AC current
Disconnect both test probes 9 from the
product .
Turn the rotary knob 3 to A∼ .
7 .
.
GB/IE
51