System Settings; Main Menu; System Settings Menu; Sequence - Bosch VSS8394/01T Installationshandbuch

VSS8394/01T Multiplexer | Installation Manual | Chapter 2
• Select YES to start the wizard setup. The wizard
setup enables you to configure the system to your
own settings and guides you through the process
automatically.
• Select NO to enable the system to automatically con-
figure itself to the factory default settings.
Note
For detailed information on the on screen menus refer
to the System Settings Part.
When completed the following screen will appear:
C O N F I G U R A TIO N
W I ZA R D
C O M P L ETE D

2.4 SYSTEM SETTINGS

The system settings can be configured to your own
requirements. The system is setup via on-screen menus.
To access the menu options:
• Press the MENU button. Toggle to switch on/off.
The ROTARY wheel controls the menu navigation as
described in the Operation Instructions.
At the end of this chapter you will find the complete
menu structure in a diagram.

2.4.1 Main Menu

After pressing the menu button the following menu will
be displayed:
M A I N M E N U
HISTOR Y
SWITCH TO PLAYBACK VIEW
VIEW SETTINGS
TIME / DATE
SYSTEM SETTINGS
Note
HISTORY, SWITCH TO PLAYBACK VIEW,
VIEW SETTINGS and TIME/DATE functions are
described in detail in the Operation Instructions.
Remark
After entering the system settings, alarms are disabled.

2.4.2 System Settings Menu

With the System settings menu you can configure the
system according to your own requirements.
Configurations that can be changed are:
Bosch Security Systems | 2003-06
Downloaded from www.Manualslib.com manuals search engine
Select system settings from the main menu and the fol-
lowing menu will appear:
M A I N M E N U
SYST EM SET T I NGS

SEQUENCE

ALARMS

A U X -O U T P U T
R E C O R D E R
REMOTE SUR VEILLANCE
INST ALLATION
SER VICE
2.4.3 Sequence
You can change the sequence dwell time from 01 sec to
30 secs. Sequence/dwell time is the length of time an
image is displayed before the next image in the
sequence is shown.
M A I N M E N U
SYSTEM SETTINGS
S EQU ENCE
D W E L L TI M E
2.4.4 Alarms
The Alarm Profiles can be accessed from the Alarm
menu.
M A I N M E N U
SYSTEM SETTINGS
A L A R M S
ALARM DURATION
A UT O ACKNOWL EDG E
A LA RM PR O FILE DA Y
ALARM PROFILE NIGHT
D A Y / NIG HT S W IT CH
EVENT REPLAY
ALARM This defines the period of time (5
sec. to 15 min.) that the alarm
DURATION
beeper and the alarm relay are acti-
vated, unless the operator acknow-
ledges the alarm.
EN | 6
0 5 S E C
0 5 S EC
OFF
NONE
ON