Cleaning And Care - Klarstein 10028594 Handbuch

Assembling the Cookie Maker
• Step 1
Fit the separator (26) on the shaft with cutting edges uwards, then fit the round metal holder (27) onto the
seperator (26), fix the screw ring onto the cut housing.
• Step 2
Fit the patterned flat metal strip (28) into the metal holder (27). Push the metal strip back or forward to select
the preferred pattern.
• Unplug the appliance.
• For easier cleaning, quickly rinse the accessories after use. Completely dismantle the mixer attachment.
Handle the blades with care, as some have sharp cutting edges.
• Wash , rinse and wipe the accessories or the can be put in the dishwasher, except for the metal components
of the mincer attachment body Fine grinding disc (14), Medium grinding disc (15), Worm shaft (16), Cutter
blade (17),Coarse grinding disc (18) and Screw ring (19).
• The grinding disc and the blade must be kept lubricated. Wipe them over with cooking oil after each use.
• If your accessories are discoloured by food (carrots, oranges etc), rub them gently with kitchen towel dipped
in cooking oil and then clean in the usual way.
Producer: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin, Germany.
7

Cleaning and Care