Setting The Temperature; Energy Saving Mode; Alarm Function - Bosch GSN Serie Gebrauchsanleitung

Setting
the temperature
Fig. "
Freezer
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 5 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 1.

Energy saving mode

When the appliance is not used,
the display on the controls switches
to energy saving mode.
Energy saving mode display, Fig. "/
■
4, illuminates.
The luminosity of the temperature
■
displays is reduced.
When the "Super" function is switched
■
on, the corresponding super display is
lit (Super freezing display, Fig. "/2).
As soon as you operate the appliance,
e.g. open door or press any button,
the display switches to normal
illumination.

Alarm function

In the following cases an alarm may be
actuated.
Door opening alarm
The door alarm (continuous sound)
switches on and the Alarm "/3 display
is lit if the appliance is left open for too
long. Close the appliance to switch off
the door alarm.
Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The alarm display 3 is lit.
When the alarm button 7 is pressed,
the temperature display 1 indicates for
five seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted and
the temperature display 1 indicates
the set temperature.
The alarm may switch on without any risk
to the frozen food
when the appliance is switched on,
■
when large quantities of fresh food are
■
placed in the appliance,
if the freezer compartment door is
■
open too long.
Switching off the alarm
Fig. "
Press the alarm button 7 to switch off
the warning signal.
en
29