Replacing The Filter - Philips 3000i Serie Benutzerhandbuch

Replacing the filter

Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure
that the air purification filter is in optimal condition when the air purifier is
operating� When the filter need to be replaced, the filter replacement alert
lights up red�
If the filter is not replaced in time, the air purifier will stop operating and
automatically lock to protect the air quality in the room� Replace the filter as
soon as possible�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before
replacing the filters (fig v)�
Filter alert light status
The filter replacement alert
lights up
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig c)�
3
Pull the filter from the appliance (fig d)�
4
Remove all packaging materials of the new filter (fig e)�
5
Put the new filter into the appliance (fig f)�
6
Reattach the back cover (fig g)�
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
reset the filter lifetime counter�
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�
EN
12
Action
Replace the NanoProtect filter Series 3
(FY3430/30)
for 3 seconds to