Herunterladen Diese Seite drucken

Pepperl+Fuchs VBG-PB-K20-DMD-BV Montageanweisung Seite 6

As-interface

Werbung

1.5
Frontansicht und Anschlüsse / Front view and connections / Vue de face et
raccordements / Vista frontale e collegamenti / Vista de frente y conexiones
[2]
[3]
[4]
+
M4
5 mm max!
+ASI 1–
ASI 1 +PWR– (max. 8A)
+ASI 2–
+
ASI 2 +PWR– (max. 8A)
+ASI1–
Anschluss AS-i-Kreis 1 / Connection AS-i circuit 1 / Raccordement bus AS-i 1 / Collegamento circuito AS-i 1 / Conexión
circuito AS-i 1
ASI1 +PWR– (max. 8 A)
Versorgungsspannung AS-i-Kreis 1 / Supply voltage AS-i circuit 1 / Tension d'alimentation bus AS-i 1 / Tensione di ali-
mentazione circuito AS-i 1 / Tensión de alimentación circuito AS-i 1
+ASI2 –
Anschluss AS-i-Kreis 2 / Connection AS-i circuit 2 / Raccordement bus AS-i 2 / Collegamento circuito AS-i 2 / Conexión
circuito AS-i 2
ASI2 +PWR– (max. 8 A)
Versorgungsspannung AS-i-Kreis 2 / Supply voltage AS-i circuit 2 / Tension d'alimentation bus AS-i 2 / Tensione di ali-
mentazione circuito AS-i 2 / Tensión de alimentación circuito AS-i 2
[1]
LED-Statusanzeige / LED status display / Affichage d'état LED / Visualizzazione LED / LED visualización
[2]
Profibus-Anschluss / Profibus connection / Raccordement Profibus / Collegamento Profibus / Conexión Profibus
[3]
LCD-Anzeige / LCD display / Affichage LCD / Visualizzazione di stato LCD / Display LCD
[4]
Tasten für Handbedienung / Buttons for hand operation / Boutons pour commande manuelle / Pulsanti per le
impostazioni manuali / Teclas para accionamiento manual
Am Kabel für das Netzteil sollten keine Slaves oder Repeater angeschlossen werden. Am Kabel für den
AS-i-Anschluss sollten keine AS-i-Netzteile oder weitere Master angeschlossen werden. /
At the cable for power supply no slaves or repeaters may be attached. At the cable for AS-i circuit no power
supplies or further masters may be attached. /
Au câble pour l'alimentation aucun esclave ou répéteur ne peut être raccordé. Au câble pour le circuit AS-i
aucune alimentation ou autre maître ne peut être raccordé. /
Al cavo per l'alimentazione nessuno slave o ripetitore può essere collegato. Al cavo per il circuito AS-i nes-
sun alimentatore o altro master può essere collegato. /
En el cable de la alimentación AS-i no se deben conectar esclavos o repetidores. En el cable del circuito
AS-i no se debe conectar ninguna fuente de poder AS-i u otro master.
6
Zumutbare Änderungen aufgrund technischer Verbesserungen vorbehalten.
Pepperl+Fuchs GmbH · 68301 Mannheim · Telefon (06 21) 7 76-11 11 · Telefax (06 21) 7 76 27-11 11
AS-i 3.0 Profibus-Gateway in Edelstahl
[1]
-
-
-
+
+
Montageanweisung // Installation Instructions
© Pepperl+Fuchs, Printed in Germany
Internet http://www.pepperl-fuchs.com

Werbung

loading