Care And Maintenance - Kärcher IVS 100 Originalbetriebsanleitung

Training the remote control
All training modes are executed with the
remote control's start/stop button!
The remote control must be trained (con-
nected) prior to its first use.
1. Activate training mode
If the device has not yet been trained with
any remote controls, then the training mode
is automatically activated for 2 minutes af-
ter being switched on.
If another remote control is to be trained,
then the training mode has to be activated
beforehand.
 Turning on the Appliance
 Quickly press the start/stop button 4x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again to confirm
the procedure.
2. Train remote control
 Quickly press the start/stop button 3x.
3. End training mode
 Quickly press the start/stop button 3x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again twice to
confirm the procedure.
Overview of the possible training modes
Mode
Activate training mode
Train remote control
End training mode
Delete trained remote
control (delivery state)
* If the device is already switched on, briefly
switch it off and on again.
** Press the button for less than a second.
Device main Quickly
switch* press the
button**
Switch on
Switch on
EN
Operation
The device can be controlled remotely after
training the remote control:
 To switch it on: quickly press the start/
stop button.
 To switch it off: quickly press the start/
stop button.
Note: The on/off switch on the device still
remains active and can be used normally.
Deleting the remote control
memory in the device
The remote control memory must be delet-
ed in order to operate the device without a
remote control.
 Turning on the Appliance
 Quickly press the start/stop button 8x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again to confirm
the procedure.

Care and maintenance

 The remote control requires no mainte-
nance.
 Clean the casing with a damp cloth if re-
quired.
Press and
hold the
button***
4x 1x
3x
3x 1x
8x 1x
*** Press the button for longer than a sec-
ond.
– 2
Feedback from de-
vice
Suction turbine
switches on quickly
Suction turbine
switches on quickly
x2
Suction turbine
switches on quickly
5