Programming Track Numbers - Philips AZ 1065 Handbuch

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ programme are played in
SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme
REPEAT ALL - repeats the entire CD/ programme
REPEAT - plays the current track continuously
1. To select your play mode, press the MODE button (on the
remote control SHUFFLE or REPEAT) before or during playback
until the display shows the desired function.
2. Press PLAY•PAUSE 2; (on the remote control 2;) to start
playback if in the STOP position.
3. To return to normal playback, press the respective MODE (or
the respective SHUFFLE or REPEAT) button until the various
SHUFFLE/ REPEAT modes are no longer displayed.
– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your CD tracks
in the desired sequence. If you like, store any track more than
once. Up to 20 tracks can be stored in the memory.
1. Use the SEARCH ∞ or § on the set, (on the remote control
¡ or ™) to select your desired track number.
2. Press PROG.
™ Display:
appears briefly.
™ If you attempt to programme without first selecting a track
number,
3. Repeat steps 1-2 to select and store all desired tracks.
™
20 tracks.
4. To start playback of your CD programme, press
PLAY•PAUSE 2; (on the remote control 2;).
Reviewing the programme
In the stop position, press and hold down PROG for a while until
the display shows all your stored track numbers in sequence.
Downloaded from www.Manualslib.com
random order
continuously in random order
and the selected track number
PROGRAM
is shown.
is displayed if you attempt to programme more than
manuals search engine
CD PLAYER
PROGRAM
9