Playback; Operations - Yamaha ATS-4080 Schnellstartanleitung

PLAYBACK

Operations

Remote control signal transmitter
Transmits infrared signals.
1
1
z (power) button
Turns on or off the unit.
Center unit
Turned on
The indicator for the last input
source selected glows.
Indicates the surround setting, and network or
Bluetooth connection status.
Turned off/network standby
Subwoofer
Turned on
Off Glows
Turned off/network standby
Glows
NOTE
• When the unit is turned on for the first time after purchase,
the * indicator on the center unit flashes slowly.
While the * indicator is flashing, network settings from your
iOS device (an iPhone, etc.) can be applied to the unit to
connect the unit to a wireless network. For details on
settings, see "Connecting to a network using the WAC
function" in the Owner's Manual. Press any button on the
remote control to cancel this function if it will not be used.
The * indicator does not flash if the unit's NETWORK jack
is connected to a router using a cable (wired connection).
PLAYBACK ➤ Operations
13
En