Specifications; Safety Instructions - Makita 8413D Betriebsanleitung

ENGLISH
1 Push button
2 Battery cartridge
3 Switch trigger
4 Reversing switch lever
5 A side
6 B side
7 Clockwise
8 Counterclockwise
9 Low speed
10 High speed

SPECIFICATIONS

Model
Capacities
Concrete ......................................................13 mm
Steel ............................................................13 mm
Wood ...........................................................30 mm
Wood screw .................................................6 mm x 75 mm
Machine screw ............................................6 mm
-1
No load speed (min )
High .............................................................0 – 1,300
Low ..............................................................0 – 400
Blows per minute
High .............................................................0 – 19,500
Low ..............................................................0 – 6,000
Overall length .................................................267 mm
Net weight (with battery cartridge) .................2.3 kg
Rated voltage .................................................D.C. 12 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.

SAFETY INSTRUCTIONS

WARNING! When using battery operated tools basic
safety precautions, including the following, should
be followed to reduce the risk of fire, leaking batter-
ies and personal injury: Read these instructions
before operating this product and save these instruc-
tions.
For safe operation:
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider the work environment
– Do not expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flammable
liquids or gases.
3. Keep children away
– Do not let visitors touch the tool. Keep visitors
away from work area.
6
Explanation of general view
11 Speed change lever
12 Action mode changing ring
13 Arrow
14 Adjusting ring
15 Graduations
16 Tighten
17 Sleeve
18 Bit
19 Bit holder
20 Grip base
8413D
4.
5.
6.
ENA002-1
7.
8.
9.
10. Do not abuse the supply cord (if fitted)
21 Teeth
22 Side grip
23 Loosen
24 Depth rod
25 Thumb screw
26 Screw
27 Set plate
28 Limit mark
29 Brush holder cap
30 Screwdriver
8433D
14 mm
13 mm
36 mm
6 mm x 75 mm
6 mm
0 – 1,300
0 – 400
0 – 19,500
0 – 6,000
267 mm
2.4 kg
D.C. 14.4 V
Store batteries or idle tools
– When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
out of reach of children.
– Ensure that battery terminals cannot be shorted by
other metal parts such as screws, nails, etc.
Do not force the tool
– It will do the job better and safer at the rate for
which it was intended.
Use the right tool
– Do not force small tools or attachments to do the
job of a heavy duty tools. Do not use tools for pur-
poses not intended.
Dress properly
– Do not wear loose clothing or jewellery, they can
be caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear pro-
tecting hair covering to contain long hair.
Use protective equipment
– Use safety glasses and if the cutting operation is
dusty, a face or dust mask.
Connect dust extraction equipment
– If devices are provided for the connection of dust
extraction and collection ensure these are con-
nected and properly used.
– Never carry the tool by the cord or yank it to dis-
connect from the socket. Keep the cord away from
heat, oil and sharp edges.
8443D
16 mm
13 mm
38 mm
10 mm x 90 mm
6 mm
0 – 1,400
0 – 450
0 – 21,000
0 – 6,750
267 mm
2.6 kg
D.C. 18 V