Concerning The Safe Modes - Panasonic AW-PH360L Bedienungsanleitung

Installation

Concerning the safe modes

This pan-tilt head comes with two safe modes for protecting people and personal property
from harm and the pan-tilt head from damage.
When one of the safe modes is established, the tally lamps blink, and panning and tilting
operations can no longer be performed.
Be absolutely sure to adjust the balance when mounting the camera on the pan-tilt head.
One of the safe modes may be established if the camera is not properly balanced.
1. Collision-triggered safe mode
The collision-triggered safe mode is established
when the arm of the pan-tilt head or an
accessory installed on the head has collided
with an obstacle or person.
The safe mode is released when the PAN/TILT
lever on the controller is returned to its centre
position.
Ensure that there are no obstructions or people
in the surrounding area.
2. Overload-triggered safe mode
The overload-triggered safe mode is
established if the balance is upset when an
accessory is installed on the pan-tilt head.
The safe mode is released when the PAN/
TILT lever on the controller is returned to its
centre position.
Check whether the camera mounting plate
has been mounted correctly.
(Be sure to ask your dealer to install the unit.)
- 33 (E) -
View showing collision with a wall, etc.
Too far off the centre of gravity
Centre position
of tilt rotation
View of unacceptable mounting balance
Centre of gravity of
accessories installed
on the unit