Analog Connections; Video Connections - Yamaha dvd s510 Bedienungsanleitung

DIGITAL OUT
PCM DIGITAL
MPEG DTS
OPTICAL COAXIAL
AV receiver
DIGITAL OUT AUDIO OUT VIDEO
OUT
PCM DIGITAL
MPEG DTS
OPTICAL COAXIAL R L VIDEO
<B>
V
VIDEO
AV receiver
VIDEO
OUT
VIDEO
IN
TV
TV
DIGITAL OUT AUDIO OUT VIDEO S VIDEO
OUT
PCM DIGITAL
MPEG DTS
OPTICAL COAXIAL R L VIDEO S VIDEO

Analog Connections

AUDIO OUT VIDEO
OUT Connect AUDIO OUT L (left) and R (right) jacks of the DVD-player to
corresponding input jacks of your audio equipment such as AV receiver.
R L VIDEO
R L
R L
1 CD/DVD
R L

Video Connections

S VIDEO
OUT
If your AV receiver has video output jacks, connect your receiver (and then
to your TV) so that you can use one TV for several different video sources
(LD, VCR etc.) by simply switching the input source selector of your receiver.
S VIDEO
The DVD player has three types of video output jacks. Use one of them in
accordance with the input jacks of the equipment to be connected.
<A>
S-Video Connection
S
S (separate) video connection achieves a clearer picture than composite
video connection by separating color and luminance when transmitting
S VIDEO signals. Use commercially available S-video cable. Receiver (and TV) with S-
INPUT
video input is required. <A>
S VIDEO
Composite Video Connection (1, 2)
OUT
S VIDEO
Use RCA video cable supplied with this unit when connecting the DVD
IN
player to your TV.
VIDEO 1, 2 jacks of VIDEO OUT output the same signal. You can connect
one to your receiver's input using supplied Audio/Video cable, and the other
to another receiver or your TV. <B>
SCART Connection
If your TV has only 21-pin terminal for video input, and you want to connect
it directly to the DVD player, you can use this player's 21-pin SCART output
jack. <C>
C
AUX/VCR
IN
OUT
TV OUT
PREPARATION 15