Werbung
Safety Notes
The tripod impulse sprinkler is not a toy. Keep the article out of
reach of children.
Using
1. Fold out the tripod.
2. Connect the water hose with the quick coupling (A).
3. For circle watering of 360° lift up the spring (B), as shown in
the picture below.
4. For sectional watering turn the collars (C) in the desired
position. The radius of the section can be determined by
positioning the spring (B) between both collars (C). Use the
turning switch (D) on the top to adjust the pattern of the
water jet.
5. Insert the tripod into the ground. Do not beat with a hammer
or similar on the impulse sprinkler.
Adjusting the Distance
For adjusting the distance, you have to turn on the water tap
completely or only partly. The more you turn on the water tap,
the higher the water pressure will be and thus the wider the
water jet will be thrown.
Instruction Manual
Impulse Sprinkler
Article No. 86 12 93
Werbung
