Cable Connection; Maintenance And Care - Westfalia 70 73 31 Bedienungsanleitung

Cable Connection

The connection-box sits on the backside.
Remove the screw with a suitable screwdriver.
Slide the connection cable through the upper
opening and mount the cable with the stress
relief.
In the connection-box you will find two
terminals. The polarity in the connection-box
is labelled with a minus pole and a plus pole.
If you are not sure about the correct polarity,
use a multi meter to measure the terminals
and determine the resp. poles. Direct the solar
module towards the sun.
Connect the solar cable with cable shoes onto
the terminals. You can also solder the cable
on the terminals.
To close the connection-box, place the lid and
tighten the screws.

Maintenance and Care

Soiling on the front-side of the glass surface will reduce the incidence of
light onto the solar cells and this will decrease the output of electrical
power.
In case of heavy soiling, clean the glass with usual glass cleaners. To avoid
scratching the glass surface, use plenty of water and a soft brush or a
cloth.
Check the electrical cables at regular intervals for any form of damage or
corrosion and for firm fit on the cable connections.
Installation Hints and Mounting
7
Cable Insertion with
Stress Relief