Operation - Velleman DVR4H5 Bedienungsanleitung

9.3 Configuration
Before configuring push status, make sure that:
•
The DVR system is set up as described in point 3. Connection and Setup in the full manual on the included CD-ROM.
•
The DVR is connected to the internet.
•
The EagleEyes app is installed on your mobile device (see Installing the EagleEyes App above).
Steps
1. Open EagleEyes, and add this DVR to the EagleEyes address book.
For more details about EagleEyes operation, visit www.eagleeyescctv.com.
2. In the EagleEyes app, enable push status as described below.
3. Try triggering an alarm event to see if you get a push status message.
10.

Operation

Display
The following image shows the screen layout.
live audio channel 1–4 enabled
audio channel disabled
digital zoom on (yellow) / off
LAN connected
no network connection
USB flash drive connected
key lock on
sequence mode
recording mode
administrator logged on
Note that actual screen icons might differ slightly from the ones shown above.
V. 01 – 03/06/2014
DVR4H5
A system date and time
B general system status
C available HDD capacity
D channel status
playback audio channel 1–4 enabled (yellow)
timer recording
USB mouse connected
internet connected
hard disk overwrite (default)
PTZ mode
motion mode
alarm
alarm mode
operator logged on
8 ©Velleman nv