Memory Guard - Yamaha RXV-1700 Bedienungsanleitung

CUSTOMIZING THIS UNIT (MANUAL SETUP)

■ Memory guard

Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
B)MEMORY GUARD
[
OFF
p
[ ]/[ ]:Adjust
• Select "OFF" to turn off the "MEMORY GUARD"
feature.
• Select "ON" to protect:
– DSP sound field program parameters
– all "SET MENU" items
– all speaker levels
Note
When "MEMORY GUARD" is set to "ON", you cannot select
and adjust any other "SET MENU" items.
■ Audio select
C)AUDIO SELECT
Use this feature to designate the default input mode for the
input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
C)AUDIO SELECT
[AUTO
[p]/[[]:Adjust
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select "LAST" if you want this unit to automatically
select the last input mode used for the connected input
source.
Note
Selecting "LAST" does not recall the last setting for the EXTD
SUR. button on the remote control.
92
En
B)MEMORY GUARD
ON
[
LAST
■ Decoder mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
D)DECODER MODE
[AUTO
[p]/[[]:Adjust
• Select "AUTO" to if you want this unit to
automatically detect the type of input signals and select
the appropriate decoder mode.
• Select "LAST" to if you want this unit to automatically
select the last decoder mode used the connected input
source.
Note
Selecting "LAST" does not recall the last setting for the EXTD
SUR. button on the remote control.
■ Parameter initialization
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: CLASSICAL, LIVE/CLUB,
ENTERTAINMENT, MOVIE, STEREO,
SURROUND DECODE
E)PARAM. INI
CLASSICAL
*LIVE/CLUB
ENTERTAINMENT
*MOVIE
STEREO
SURROUND DECODE
Press DSP key
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
"MEMORY GUARD" is set to "ON" (see page 92).
D)DECODER MODE
LAST
E)PARAM.INI
field