Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mini wireless power outlet switch RSL
Item no. 526915
Mini wireless power outlet switch set RSL
Item no. 526916
Mini wireless power outlet switch set 2 RSL
Item no. 526917
Intended use
Connect an electrical device to this wireless power outlet. The wireless remote control can be used to turn
on and off the wireless power outlet and the connected electrical device.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 1 x wireless power outlet (item no. 526915 + 526916)
• 2 x wireless power outlet (item no. 526917)
• Button cell battery CR2032 (item no. 526916 + 526917)
• Remote control (item no. 526916 + 526917)
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• Do not use this product in hospitals or medical facilities. Although the product sends only
relatively weak radio signals, the signals sent may still cause malfunction of life-support
systems. The same may also apply to other areas.
• Only use a properly installed power outlet of the public power supply as a power source for
the power outlet(s).
• This product is not a toy, keep it out of the reach of children. Use extreme caution when children
are present. Children may attempt to insert objects into the wireless power outlet's openings.
There is a risk of lethal electric shock!
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Never touch the product with moist or wet hands. There is a risk of lethal electric shock!
• Never connect two or more wireless power outlets in series.
• The wireless power outlet is entirely voltage-free only once it has been disconnected from the
power supply.
• Do not overload the wireless power outlet. Never exceed the maximum permitted connected
load as listed in technical data.
• Should the product housing be damaged, discontinue use of the product immediately! If it is
still connected to the power supply, do not touch the wireless power outlet or any connected
device(s)! First disable the power outlet that the wireless power outlet is connected to (flip the
fuse or circuit breaker). Only now should you disconnect the product from the power outlet.
Take the product to a professional workshop or dispose of it in accordance with environmental
regulations.
• Unplug the wireless power outlet for extended periods of disuse.
• For safety reasons, unplug the wireless power outlet in case of a thunderstorm.
• Never use the product immediately after it has been brought from a cold room into a warm one.
The condensation generated could destroy the product. This poses a risk of fatal injury due to
electric shock! Allow the device to reach room temperature before connecting and using it. This
may take several hours.
• Never pour liquids over electric devices and never place liquid-filled objects near the product.
• Avoid use and storage near strong magnetic fields, such as in the vicinity of machines or
speakers.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
Version 05/15
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
b) (Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) battery.
• The (rechargeable) battery should be removed from the device if it is not used for a long period
of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might
cause acid burns when in contact with skin, therefore use suitable protective gloves to handle
corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that children or pets swallow them.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
1
2
3
1 Power outlet
2 On/off switch incl. power indicator
3 Battery compartment lid
4 Indicator lamp
5 Control keys
6 Switching group selector
Inserting/replacing battery (remote control)
1. Remove the battery compartment lid (3) from the back of the remote control.
2. Insert a new round cell battery, type CR2032, into the battery recess. The positive pole must face up (see
"+" imprint on the battery). Push the battery into the battery recess until it stops.
3. Close the battery compartment.
Replace the battery when the remote control's range noticeably decreases or when the
indicator lamp (4) no longer lights up when a button is pushed.
Key functions (remote control)
• Use the switching group selector (6) to select one of four switching groups. There are three channels
available for each switching group. The remote control thus has twelve channels in total.
• The control keys (5) are arranged in two columns:
- Left column = ON
- Right column = OFF
• Use the three upper keys of the left column to individually activate channels 1 to 3.
• Use the three upper keys of the right column to individually deactivate channels 1 to 3.
• Use the lower key ALL ON of the left column to simultaneously activate channels 1 to 3.
• Use the lower key ALL OFF of the right column to simultaneously deactivate channels 1 to 3.
The indicator lamp (4) flashes briefly every time a button is pushed.
4
5
6
Werbung
