Herunterladen Inhalt Inhalt Diese Seite drucken

Technical And Electrical Safety; Use Of The Appliance - Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung

Gewerbliche muldenmangel
Vorschau ausblenden Andere Handbücher für Marine PRI318:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Technical and electrical safety

The flatwork ironer must not be operated in the same room as dry-cleaning equipment
using perchloroethylene or solvents containing CFCs.
The flatwork ironer may only be operated in a suitable dry room.
Only operate the flatwork ironer when all removable outer panels are in place so that it is
impossible to touch an electrical component, moving part or hot machine parts.
Do not damage, remove or bypass the safety features or control elements of the flat-
work ironer.
Do not make any alterations to the flatwork ironer unless explicitly authorised to do so
by Miele.
If the control elements or the electrical cabling insulation has been damaged, the flat-
work ironer must not be used until such damage has been repaired.
Repairs may only be carried out by suitably qualified personnel. Incorrect repairs can
cause considerable danger to users.
Faulty components may only be replaced by genuine Miele spare parts. Miele can only
guarantee that the flatwork ironer fully complies with safety requirements if Miele genuine
replacement parts are used.
The electrical safety of this flatwork ironer can only be guaranteed if it is correctly
earthed. It is essential that this standard safety requirement is observed and regularly
tested. If in any doubt, please have the electrical installation inspected by a qualified elec-
trician. Miele cannot be held liable for damages arising from an absent or faulty earth con-
nection.
The flatwork ironer is only completely isolated from the electricity supply if switched off
at the mains isolator, or if the on-site mains fuse is disconnected.
Electrostatic charge may occasionally build up whilst using the flatwork ironer, depend-
ing on the type of fabric and residual moisture.

Use of the appliance

The flatwork ironer must not be operated unsupervised.
The flatwork ironer can be used by people with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, only if they are supervised whilst using
it, or have been shown how to use it in a safe way and recognise and understand the
dangers of such use.
Always supervise any children in the vicinity of the flatwork ironer. Never allow children
to play with the flatwork ironer.
While the flatwork ironer is switched on and heated, there is a risk of burning if the edge
of the heater plate on the laundry output side is touched.
Do not set the ironing temperature higher than the temperature given on the care label of
the laundry item you intend to iron. The laundry could ignite if the ironing temperature is set
too high.
en - Warning and Safety instructions
47

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Marine pri418Marine pri421

Inhaltsverzeichnis