Inhaltszusammenfassung für Husqvarna VIKING Do All Quilters Hoop
Seite 1
Service Advice No : 2006/06-26 Date : 2006-04-21 Model : Do All Quilters Hoop Do All Quilters Hoop KEEPING THE WORLD SEWING VSM Group AB • SE-561 84 Huskvarna, Sweden www.husqvarnaviking.com...
Seite 2
3. Poista koko kehän pidike (D): 3. Retirez complètement le support de cercle (D). OBS! Byte av broderbågens hållare får endast utföras av en Husqvarna Nota: la sustitución de la sujeción del bastidor SÓLO deberá llevarla a Viking auktoriserad service man.
Seite 3
� � � � � � ��� � Mounting Montage 1. Mount the shaft together with the Hoop holder on the embroidery unit and 1. Rahmenhalter und Führungswelle montieren und mit der lock it with the C- clip Klemmscheibe (C) sichern. 2.
Seite 4
6. Put the embroidery unit on the machine and go into the service program, 6. Die Stickeinheit an der Maschine anbringen und das Serviceprogramm folgender- menu 1 by pressing the reverse feed button and the sensor foot pivot button maßen öffnen: Maschine ausschalten, Rückwärtstaste und Taste für die Drehposition as the main switch is switched on.
Seite 5
����������������������� ����������������� ����������������� ������������������� ��������������� ��������������� ������������� ������������� ���������������� �������������� �� �������������� � ������������ �������������� �������������� 10. In Service menu 2 /Sensor check The Hoop sensor square should now be 10. Im Service Menu 2 /Sensor Check muss das Quadrat für den Rahmen- black (= Activated).