Klarstein Steam bro Bedienungsanleitung Seite 20

EN
20
• Only iron on a stable, flat, heat-resistant and moisture-resistant surface. We recom-
mend that you use a standard ironing board.
• During and shortly after use, place the device upright on its base and on a flat, sta-
ble, heat-resistant and moisture-resistant surface to prevent damage to the surface
which could be caused by the hot bottom section of the iron.
• Immediately after ironing, place the still hot device down a minimum distance of
15 cm away from walls, furniture and other objects.
• Be aware of damage caused by fire! Never iron on one spot for too long.
Avoiding Damage to Material, Property and the Device
• Do not iron on surfaces made from glass or plastic.
• Never cover up the steam nozzles and do not stick any objects into them.
• Operate the steam switches only when the water reservoir is filled with water as
otherwise the water pump may be damaged and the useful service life of the device
may be shortened.
• Do not drop the device or allow it to be knocked violently.
• Do not place any heavy objects on the device, the cable or the plug.
• Do not pull or carry the device by the cable.
• Do not expose the device to extreme temperatures, wide temperature variations,
moisture, wet conditions or direct sunlight.
• Always test the device first on a small, inconspicuous spot on the clothing.
• Never pour any descaling or cleaning agent or other chemical additives into the
de- vice. This may destroy the device and safe working is no longer guaranteed.
• Do not use any caustic or abrasive agents to clean the device. These may damage
the surface. Do not use any metal objects to remove dirt from the bottom of the iron.
• Store the device away only once it has completely cooled down and there is no
more water in the water reservoir.